Hi at all I’m coming from Serato and Pioneer DJ and starts my transition to Denon DJ with the Sc6000. Ive installed everything and running the latest software of 1.7. (Edit 2.2.1!) The problem is the vinyl mode and its horrible cause i’ve no reaction to my movements like you can see on the attache…

I see you have returned your units already @djscode but for anyone else running into the same issue, I believe I have a “fix”. The issue seems to be related to the magnetic nature of the platters vinyl mode. The solution ( at least for me ) is to make sure the platter is evenly heated. You can d…

Damn really??? It was only this and nobody knew that this is the solution of the problem… Hui hui hui now I’m angry again:joy::joy::joy:

Have you tested that theory with a hair dryer or something else to heat it besides the conductive surface of your hand? It could instead be an issue with platter capacitive touch calibration rather than temperature. The Geminis had some weird touch issues that were mitigated somewhat with changes …

I don’t have access to one at the moment so it’s not something I’ll be able to test. I can try to use my laptop and place it on top for example, but it may take a while for the laptop to produce that amount of heat with the current cold weather. It can probably be a calibration issue because what I…

These platters could be using complex capacitive touch compared to something simplistic like Hanpin, for instance. The Hanpins have no even hypothetical ability to tell a difference where you touch it. These InMusic tempered-glass platters might be closer to a smartphone, with engineered capabilit…

I just purchased two new SC6000’s, both updated and running 2.3.2. Only one of them does has an issue with the capacitive jogs. The heating up trick didn’t work, but… I found that if I touched my mixer while the SC is malfunctioning, it would instantly work. If I stopped touching the mixer, the is…

[image] gsweater: . The cue lights don’t match to my SC decks, the fader start function doesn’t work, and the FX are buggy - they don’t track the BPM really at all Typical issues when you do not plug the players into correct LAN ports on the mixer. Check the manual before you return the unit. …

[image] gsweater: The cue lights don’t match to my SC decks, the fader start function doesn’t work Did you assign them properly in Engine Connect?

Its so unbrliveable that a lot of people report this issue and InMusic do nothing and dont help. Ive report this with every single detail and they told me, that they order the units back from the seller, to find the issue… So that was not the truth, seems to.

[image] gsweater: This screams “ground issue.” Checked it against multiple plugs and outlets - issue is present no matter what. Indeed it does. But again, before you return them swap power cables between the units and test also outside your own house.

SC6000 Scratching no reaction...

Engine DJ Hardware Media Players

SlayForMoney December 12, 2022, 2:32pm 78

All clear, with this new info you did all you could to troubleshoot imho

Denon QC is not as it was used to be.

LC6000 jog wheels not working