I’m going to be making a few repairs in the near future on my Prime 4. A lil back story I got my device from a crackhead on Facebook marketplace lmaoooo… the unit is missing the crossfader, USB B Port, Headphone jacks and probably every tiny screw possible. Also literal dents on the platters?!? This unit was in rough shape when I go to it.
Regardless I got a cheap running prime 4 but I cannot get the full functionality out of it until all of these things are repaired.
I’ve already purchased a mini inno fader for replacement but struggling to find the other parts to repair this device.
Crackhead also put a skin on the whole device so it looks kinda trashy! Need to replace or take it off any advice on any of these topics would be greatly appreciated.
I do not have a warranty or anything of the sort so I’m raw doggin this one and hope that I can receive help online and in person from a few friends!
I’ll take some pictures when I’m home next week to show how wild this piece is!
Feel free to hit me up anytime I work midnights so my time management is a lil wonky! This is the new community project!
Not a clue it’s 100% a shot in the dark! They spilled some ■■■■ on it forsure so overall it’s gonna be a learning process and hopefully a successful one! If not I guess I’ll be stuck having to upgrade hehehe
Good luck, unfortunately it looks like there are no service manuals available “on the internet” (not even on those Russian sites…) for any up-to-date Denon DJ gear. For Pio you can find all of them… of course not officially.
You’d be surprised what you can get if you ask ever so nicely. I asked Denon back in 2014 (under DM holding) for a service manual for the 3700 and I was emailed it. Had all the part numbers and diagrams I needed to fix.
Bought this from Highland Park, Mi for 500$
It’s fucked up. Bought a crossfader on Amazon but the unit is missing an adapter that was under where the crossfader was and the top plate with the notches on it. Tough luck here!
Several dents/scratches on the platters.
(After Calibration they are on point)
256gb Sata drive installed held up by grip tape (■■■?!)
In search of (1) underside panel please link me if you see any!
Hi.
Only from the bottom. You unscrew all the screws from the bottom, rear and front on vertical walls.
From the top, you only need to unscrew the caps from the potentiometers.
That hurts heart to see this poor little device. It was treated so bad
How can anyone do such a damage to a 2000bucks unit ?!
Good luck at your adventure on this device.
I bought a mini inno fader pro on Amazon but I’ll still need the cable (Red/White in image) that connects from the controller to the adapter to the fader. It was in the DJ80 video I watched on YouTube. But was not included when I bough the controller.
Also in need of the face plate for on top of the inno fader. (Black piece with white notches)
I’ll attach a picture of both items below if anyone can link me or point me in the right direction for parts!
This is were we are so far, the buttons seems to be the same as numark and the old denon controllers, low profile. but i my case i leave in Tenerife - Spain and is hard to finde them and to longe to wait, so im planning to change the CUE and PLAY/PAUSE with Censor and Sleep, like this im sure no more troubles for a while until i get the right new ones.
good luck!!
How can anyone do such a damage to a 2000bucks unit ?!
Good luck at your adventure on this device.
