This post was closed and reopened. I have problems recording on audacity. I take the signal through the usb 1 port but only the channel 1 gives me a signal, the rest of the channels do not get the signal. Does anyone know why? Esta publicación fue cerrada y reabierta. Tengo problemas para grabar en…

Yes, the master output is on 9/10 and in Audacity you can’t access that as I think you want. You can record a multitrack recording with deck 1 at 1/2 deck 2 at 3/4 and so on and the master at 9/10. it’s smart because if you aren’t satisfied it’s easy to edit and make a new mix!

There is a video somewhere about this by I think it was Ethan Leo but I can’t find it. Very informative. There I learned this way of a “walk-around”.

Do you use Mac or Windows? For Windows, use this extra info, but you get some audio already, so be sure to select 9/10 like stated above: [image] X1800 and Audacity connection setup. I need help Mixers Nothing. You need to take it up with Audacity. The X1800 Prime works.…

The Audacity error 9999 was only under Windows10. Ch9+10 is master, so that’s the same for both environments.

I use Loopback and route like this to fix this annoying issue. [Screen Shot 2020-01-06 at 9.00.21 PM]

Have no idea why people do workarounds if you just want the master signal recoded - just use the free version of Rekordbox.

This still looks easier then Vietual DJ. The usb routing of decks on the screen to a usb channel on a mixer seem to be as much about random clicking until it works. Loads of rubbish of Selectibg deck channel number left, deck channel number right, a driver for each of those two, a channel (again?)…

Recording from X1800 direct to computer, only one signal

Engine DJ Hardware Mixers

Reese December 30, 2019, 4:46pm 4

Do you use Mac or Windows?

For Windows, use this extra info, but you get some audio already, so be sure to select 9/10 like stated above: