After a week of running through multiple test i finally reached a day that was much better. As in prior post issues of freezing, lagging, non selection of tracks or loading of different sources to name a few I made some test between the 6000s and 5000m’s with x 1850. In the end I was able to make t…

Could you please go back to X1850 version 1.0 to see if your weird problems are gone? https://www.denondj.com/downloads#x1850

Thanks. I will update it shortly and run test in it in the am. More to follow @Reese @D3N0NDJ I loaded the software back to 1.0. I had to do it twice as it failed or hung towards the end on the first try for about 15 min. I loaded the firmware back on the second try with no errors. I did a 45 min…

Hi @DeSelGian - These posts seem similar, can they be combined? It will make it easier for someone to help if all details are in a single thread. [image] SC 6000 are freezing Media Players I have set up two SC 6000 up with two SC5000m and x1850 mixer. First day and the tw…

Yes please combine. There is another under 4 deck and usb that could go here or by it self. Thanks! @D3N0NDJ @D3N0NDJ did a two hour live set and about 1.5 hours in one of the 6000s froze when connectinf back to beatport and stayed frozeN. On off button and holding it didn’t turn it off. Had to w…

Hey @DeSelGian - That’s a sweet setup!! As I mentioned in PM, is it possible that your media device is not fast enough to keep up? What type of drive and what is the read speed? I always recommend 90mb/s + especially for networked players.

USB - Samsung up to 300 Mb/s Hybrid Drive - Firecuda - SSD Drive - Samsung - 860 EVO I bought them specifically to try on these as I could use if they didn’t work on my production side. Freezing/lockout happens to the same deck after about 50 minutes of play. Always seems to happen when switching …

If you remove the hybrid from the equation does it still happen?

I have removed them all where I only had one of the three and the same player would give me the issue. Then I went to only using Wifi and received the same problem.

Ok, sounds like you’ve ruled out the media devices. I guess you could mix only on streaming services without any media connected to be double sure (unless you’ve already done this). The next thing to do would be to unlink the devices (remove ethernet cables) and see if just one of the player contin…

I can try it all again. Wont hurt. I only didnt try the hub,

6000 network, drives and freezing, lag, non selection

Engine DJ Hardware Media Players

JWiLL August 21, 2020, 12:21pm 4

Hi @DeSelGian - These posts seem similar, can they be combined? It will make it easier for someone to help if all details are in a single thread.