The car Amp just arrived and it looks not as plastic but it’s not even heavy a little bit. First before even unpacking I found really cool cables, not too big but I just make sure that everything sit good. The GND, +12V are plugged in to the modular power supply which is very fine at 30A and from other side, to power socket. Basically amp is designed for 2Ohm but for 4ohm subs parameters is good. It can handle up to 240W per channel and it makes very speakers crossover for subs dealing with more bass especially in big room, no too small. Both filters are also featured with Bass boost to 12db as well but in my opinion it sounds too dirty with Bass boost so I don’t touch it. Comparing to the regular studio monitors, these has no tweeter for high end frequencies, even with more High pass filter it’s too deep in my taste but both subs flexin and move so fast especially for dubstep tracks. I also noticed one more thing, the kicks on the tracks are pretty the same and no affect with subbass low frequency. It is really good feature that KICX can make kicks punch the same even if subbass goes hard, so that’s really cool feature. But I missing only one option called “Xover” for desired frequency like in others amps. Gain is fine loud if you plug in to input phone audio source but if you have only mono at one sub, it’s less loud at the same gain, with both stereo crossover it’s even louder. I think it’s not bad choise if you had Kicx too, it’s really fine.
“Sir, this is a Wendy’s”
6 Likes