LAN (PC) Port freezes the mixer, x1800. If the cable is plugged in, it freezes when starting up. When the cable is unplugged, it seems to run normally. If the cable is plugged in when it is running, it freezes shortly afterwards. I struggled for a while to reset it after I localized where the problem was coming from. This was not a solution. The support is apparently on holliday.
Does anyone have any ideas?
Have you tried a different network cable between pc and mixer ?
Oh yes, I used a different cable and a different switch. It is interesting that the hub works for the SC6000 communication. I think this port is defective.
Firmware update of the mixer, is currently at 1.6
It has worked so far. I switched the device off in the evening and the next day it froze when I switched it on. I didn’t understand that at first. It can happen sometimes.
I used it to have Beatport on the SC6000 via LAN. Unfortunately, I have no idea what else I could do. Of course it also works via the WLAN from the SC6000.