Error al grabar sesiones prime 4 plus

General Area
1

Buenos dias, A alguien le ha pasado que al grabar sesiones en un usb, en el cual estas usando para reproducir los tracks que se usan para mezclar la sesion le salga el error “usb lento para grabar, por favor use otro medio” o algo parecido? he grabado como 3 sesiones o 4 y me salta el error a los 25 minutos aproximadamente, es USB es 3.0 un pendrive sandisk pequeño los llamados ultra fit.

gracias de antemano y un saludo para todos!!

2

Hi

yes its happened to me, my solution was to switch to an SD card for recording, a decent speed one UHS-I, I managed 4.5hrs of my recent gig without a hitch.

1 Like
3

Thanks man!! i tink to do that used other usb to record the session. and… i have other question, you can help me maybe, to output the sound from ableton live to the channel 3 of denon prime 4 plus… is necessary to use a cable jack stereo to 2rcas stereo or use 2jack stereo to 2rca stereo?

4

Where is ableton live coming from? a soundcard?

1 Like
5

yes!! from the main output of my denon prime 4 come the input 1+2 of my audient id14 mk2 and i want to output the ableton sound from the pc to the channel 3 of my denon but i dont know if is necessary only one cable stereo to the x2rca stereo or…

6

I would run the PC into a USB sound card with RCA output then into the channel personally, im not sure the PC standard outputs will be sufficient quality for you, if that makes sense?

7

I have the sound card (Audient mk2) connected via USB to the PC, then the main outputs ( the denon prime4+) of the master go to the mic/line inputs of the Audient ID14 mk2, outputs 1+2 of the sound card go to the KRK monitors, and then from output 3 or 4 of the sound card take a jack to double RCA cable? or… double jack to double RCA? (stereo cables of course) that’s the doubt I have

8

Yes I think that should work.

1 Like
9

Surely you can see from the back of the Audient what connectors it has for the outputs?

You have outputs 1+2 going to the KRKs, so you need to send 3+4 to the Prime. Using a single jack will only give you one channel.

The Prime is going to the Audient just to feed the speakers presumably? You don’t want to create a loop by sending the signal from the Prime back into itself.

1 Like
10

I used a double cable jack - rca from the 3+4 output audient to the channel 4 of denon prime to input the spund from ableton live and… the outputs from denon master to 1+2 inputs of my audient