Because of database performance optimizations added with this release, Collection Databases used in Engine DJ 4.1.0 are only compatible with version 4.0.1 or later.
If a drive, USB stick or SD card is used with 4.1.0, the collection will be updated in a way that will only be compatible with versions 4.0.1 or later.
This process can take some time depending on your collection size. For larger databases on removable drives, it is recommended to use Engine DJ on the desktop for faster database migration.
You will be required to re-login to your Engine profile after updating to 4.1.0
For full compatibility, both Engine OS and Engine Desktop should be updated to 4.1.0
New Features
Bluetooth audio out support for the following Engine DJ devices:
Denon DJ PRIME 4+
Denon DJ PRIME GO
Denon DJ PRIME GO+
Denon DJ SC LIVE 2
Denon DJ SC LIVE 4
Numark Mixstream Pro
Numark Mixstream Pro+
Numark Mixstream Pro GO
Smart Headphone Cue feature automatically activates Cue on the channel of the most recently loaded track. This feature can be enabled or disabled in the Mixer tab of the Settings menu.
Engine Lighting enhancements
Increased Autoloop Count to 128 Autoloops
New visual feedback for active Autoloop and Autoloop Banks
Ability to trigger Autoloops at any time overriding scripted tracks
New Autoloop Repeat preferences
Add support for Denon DJ PRIME GO+
Slip Mode added to PRIME GO. This feature can be accessed by pressing Shift and Vinyl buttons.
High-quality FLAC audio support for Beatport / Beatsource streaming. A Beatport Professional or Beatsource Pro level subscription is required for FLAC support. Quality selection is now changed via the respective Beatport / Beatsource web portals.
Virtual DJ compatibility added for PRIME GO+
Improvements and Fixes
Connecting to a streaming service will now prompt to connect to an Engine DJ Profile, allowing you to utilize single sign-on for streaming services and access crowd-sourced streaming metadata and beatgrid information. The option to connect directly is still available.
Improved the lighting states for PRIME 4+ Sweep FX buttons for better visibility.
Fixed an issue where Match rules would affect search results, even when Match was disabled.
Fixed an issue where using the “Log out of authorized devices” function in Engine Profile would not always successfully log out of devices.
Fixed an issue that could result in a blank playlist tree after exiting Search.
Fixed an issue where instant double could cause problems with Bluetooth source decks.
Fixed an issue where engaging/disengaging some effect could lead to pops/clicks in certain circumstances.
Fixed an issue where on some devices, playing audio for the first time after turning a unit on could potentially result in an audible pop.
Fixed an issue that could result in devices coming fresh out of the box with empty sample pads.
Fixed an issue where the LIVE 4 could start in a state where the control surface LEDs and center wheel display would not light up correctly.
Additional misc. stability and other improvements.
Admittedly not read any instructions, but in my initial tests (10 minutes) I can’t get the AUTO connection to work at all. After first pairing/connection which works, if I turn bluetooth headphones off and back on it shows that they reconnect but no audio (even after a full power down of unit and headphones, it connects but no audio. I have to forget device and repair to get it working again. Tried two pairs of headphones so far.
Will admit defeat and see if there’s any instructions…
“The Auto Connect setting determines how your devices reconnect. When this setting is On, a device you have
previously paired with your EngineOS hardware will automatically reconnect when Bluetooth is enabled and the
device is in range. When set to Off, you will need to manually reconnect each time.”
In my experience auto connect works regardless of this being toggled. I’ve tried both on and off. It connects just no audio.
UPDATE:
After some further testing I can get AUTO connect to work and with audio if I turn on the headphones before the unit. Also I don’t need to forget and repair to reconnect the audio, I can select disconnect and then select the bluetooth device (headphones) again from the list to connect (with audio). The only issue seems to be when turning the headphones on after the unit boots up.
Would’ve preferred my flexible anchor point suggestion over Bluetooth out but never mind, still gonna try it out on my soundbar though, I think my neighbours will enjoy a bit of Hard Noize by Dillinja at 09:30 in the morning
Nice little update nonetheless, well done to the Denon team keep em coming.
guys i need a lil help about the Bluetooth audio out support for the following Engine DJ devices,so i can pair any bluetooth speaker with my p4+ n audio will play
hello.
When there is a version change from 3… to 4.1, do you have to re-analyze the library on the PC or does the controller automatically transform it? thank you so much
Nice little update nonetheless, well done to the Denon team keep em coming.
Indeed - little things make great things even better.
Smart Headphone Cue is very nifty, and addressing several things like the SweepFX LEDs, Prime Go Slip Mode and SC Live 4 LEDs are very welcomed. I care less about Bluetooth Out.
In my upcoming review video (20min long… ) I cover the SSW/EL part extensively. This is where the true magic happens, and that’s why I regard Engine 4.1 & SoundSwitch 2.9 as one big combo-update. The synergy effects are greater than is apparent at first glance!
) I cover the SSW/EL part extensively. This is where the true magic happens, and that’s why I regard Engine 4.1 & SoundSwitch 2.9 as one big combo-update. The synergy effects are greater than is apparent at first glance!