Hi everyone!
I resurrect this thread, since I can’t have this setup working as suggested. I have the SC Live 4 with two LC6000 controllers. They work without issues when connected to USB 1 and USB 2 of the SC Live 4, but this leaves me with only SD Card for my media library and recording target media.
I’ve bought a powered USB Hub (4 ports) and tried every combination I could imagine to connect the LC6000s… But, either their not recognised, or I see the following message in the screen:
Please plug the LC6000 into USB Port 3 to controk Deck 3 or USB Port 4 to control Deck 4.
I’ve tried with only one LC6000, in every port of the USB Hub, and having the hub connected to both USB1 and USB2 of the SC Live 4. I’ve tried turning off the unit, changing the USB port of the LC6000 and then turning it on, just in case it doesn’t work with hot plugging…
Any ideas to make this work, or a way to troubleshoot? I’d love to know how USB ports are mapped / enumerated, when using the USB Hub…
The SC Live 4 is running Engine OS 3.0.1 and Controller version 1.0.1.46 The LC6000s are both running version 00.30 for Controller and 00.49 for display.
Thanks in advance!
Daniel