Autoloops not working but Overrides and Static Looks are

When using a Soundwitch project, created with version 2.8, all lights are working as expected when controlling them with my SC Live 4 (version 4.0). As I bought a new fog machine I have added it to my existing project, now using version 2.9. When I use the new project the Overrides and Static Looks are working just fine but the Autoloops don’t work, they are not following the configuration.

I’ve already tried a few things forth and back but it looks like as soon as I save the project with version 2.9 my Autoloops are not following the configuration anymore. As Overrides and Static Looks are working I’m a bit lost to understand why one is working but not the other.

Unfortunately I don’t have version 2.8 available anymore to check the behavior once more with this older release.

Any help or ideas are welcome. Thanks.

Could this be related to the new expanded autoloops ie I think only the first column of autoloops work in engine os and not column 2-4 of each bank (something like that)

I have had a similar issue, it resolved by rolling back the Engine software and reinstalling it

Thanks for the hints/feedback so far.

Just tested the version 2.9 export with a single DMX device and now all Autoloops, Overrides and Static Loops are working.

Wondering if a “bad” DMX cable or a device in the DMX chain is causing the issue I have seen before? Although, I already tested using a single device and also different device order etc.?

Looks like I need to do more testing with the different projects, plugging in/out the different devices and use different cables. As all my lights are current setup at a venue and not having a laptop the testing may take some time.

After I tested the 2.9 project with a single device I also tested it with all my lights and this time all worked as expected. No idea what’s going on and why it’s working now but was behaving weird before!? I’ll keep monitoring the behavior if the situation changes again.