Lack of deadzone to the left of center on Sweep FX on all except Noise

[Reticuli]

I just updated and checked my other mixer, and this no longer appears to be an issue on the latest X1800 firmware. I thought I had a feature request, but I can’t find it to close out as implemented.

These are the other threads I can find:

Filter and Sweep FX Knobs sensitivity problem

I suspect at least part of this has to do with the pots’ effective curves and dead zones in the mixers’ firmware. https://community.enginedj.com/t/slightly-enlarge-left-side-of-sweep-effects-knobs-deadzones/ https://community.enginedj.com/t/slightly-more-nuance-in-the-curve-just-to-left-of-12-oclock-on-x1800-bass-knob/ Think of it like a joystick axis for a flight sim: you don’t want the joystick causing any input when there’s no pressure being applied and you also don’t want the effect to be…

Sweep effects “STAYING ON”

I have noticed this as well with my X1800. I only (ab)use the Wash Out. I return the knob to 12 o clock and the led is still flashing. Only way around is to do a full sweep and return the knob to 12 o clock. But it may also reoccur during the same session. Is this hardware or firmware fixable?

Anyone else still have this problem who wants to chime in?