# SC Live 4 Crossfader Issue
**URL:** https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460
**Category:** Standalone Controllers
**Tags:** sclive4
**Created:** [February 8, 2024, 8:18pm UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460 "2024-02-08T20:18:31Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@djsonic](https://community.enginedj.com/u/djsonic)
#### Post date: [February 8, 2024, 8:18pm UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/1 "2024-02-08T20:18:31Z")
Hi all,
I’m having an issue with the crosssfader. When it is fully to the right, any slight little nudge and I can hear the track playing on Deck 1. I don’t mean moving it to the left slightly, and this is unrelated to the fader curves, I mean just even holding it in your fingers and I get some crackle with the audio from Deck 1 bleeding through.
Only had the SC Live 4 from May 23 with fairly minimal home use. Surely the Crossfader can’t be needing replacement (albeit it’s non user replaceable) after this short time??
Any advice on what to do please, or has anyone else experienced this? At 8 months old and £1200, this is not good at all!
Is this a warranty issue?
Thanks in advance
Euan
---
### Author:  [@mufasa](https://community.enginedj.com/u/mufasa)
#### Post date: [February 9, 2024, 5:54am UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/2 "2024-02-09T05:54:59Z")
> [@djsonic](#):
>
> Is this a warranty issue?
Sounds like one to me.
Record a video of the issue before sending it in. You don’t want to be going in circles …”we couldn’t reproduce it”
---
### Author:  [@DjAj](https://community.enginedj.com/u/DjAj)
#### Post date: [February 9, 2024, 7:22am UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/3 "2024-02-09T07:22:38Z")
> [@djsonic](#):
>
> I don’t mean moving it to the left slightly, and this is unrelated to the fader curves, I mean just even holding it in your fingers and I get some crackle with the audio from Deck 1 bleeding through.
Your same problem occurs many times on the Prime 4 crossfader. If this post can be adapted to your Live 4, I solved it like this:
> [@Faulty Prime 4 crossfader? Read here!](https://community.enginedj.com/t/faulty-prime-4-crossfader-read-here/46720):
>
> The cross fader of Prime 4 has contact problems and many times it happens that when it is at full left or right it doesn’t make good contact and if you move the crossfader slider a little you hear sound that you shouldn’t hear. Many times it is not necessary to replace the crossfader. That’s how I fixed the flaw, and now it’s rock solid. The Prime 4 crossfader has two linear potentiometers inside because it is designed for analog use with stereo channels, therefore it has two strips with two s…
---
### Author:  [@djsonic](https://community.enginedj.com/u/djsonic)
#### Post date: [February 9, 2024, 10:46am UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/4 "2024-02-09T10:46:03Z")
Thanks for the suggestions.
Unfortunately, the Live 4 does not have the option to remove the Crossfader with the 2 screws, it is a fixed unit.
I remember hearing of people having a similar problem back in the day with standard mixers, and would remove the crossfader and use some electrical contact spray on the tracks and this would solve the issue, however this is definitely not something I would even attempt, especially that the unit is still under warranty. This would be guaranteed to invalidate the warranty.
Can’t believe after a short time with minimal use, this should be happening. If this had heavy use in a club, being used by multiple DJ’s, it would be slightly understandable, but not for a home user, and not at this price point!
I am awaiting a reply from their support team regarding warranty options, and will update here on the progress.
Thanks again guys
---
### Author:  [@mufasa](https://community.enginedj.com/u/mufasa)
#### Post date: [February 9, 2024, 11:55am UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/5 "2024-02-09T11:55:20Z")
> [@djsonic](#):
>
> awaiting a reply from their support team regarding warranty
You should be contacting the store. They will arrange the repairs. Has that rule changed?
---
### Author:  [@djsonic](https://community.enginedj.com/u/djsonic)
#### Post date: [February 9, 2024, 12:30pm UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/6 "2024-02-09T12:30:12Z")
I have just contacted the store where I purchased, and they are going to arrange the return for me.
Many thanks
---
### Author:  [@Gorgi\_Kakasevski](https://community.enginedj.com/u/Gorgi_Kakasevski)
#### Post date: [May 3, 2026, 2:09pm UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/7 "2026-05-03T14:09:28Z")
any news? did they give you a new product with no issues or this happens on every single one?
---
### Author:  [@Patryk\_Szurgot](https://community.enginedj.com/u/Patryk_Szurgot)
#### Post date: [May 3, 2026, 6:28pm UTC](https://community.enginedj.com/t/sc-live-4-crossfader-issue/54460/8 "2026-05-03T18:28:40Z")
Try contact cleaner