# Geyser P7 and SoundSwitch + Control One
**URL:** https://community.enginedj.com/t/geyser-p7-and-soundswitch-control-one/47892
**Category:** SoundSwitch
**Created:** [March 24, 2023, 9:34am UTC](https://community.enginedj.com/t/geyser-p7-and-soundswitch-control-one/47892 "2023-03-24T09:34:24Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Richard\_LaFernier](https://community.enginedj.com/u/Richard_LaFernier)
#### Post date: [March 24, 2023, 9:34am UTC](https://community.enginedj.com/t/geyser-p7-and-soundswitch-control-one/47892/1 "2023-03-24T09:34:24Z")
I’m having issues setting up my Geyser P7’s. When I boot up the Geyser I set my address to 27 which is what I have it on via SoundSwitch. When I edit an attribute, I can turn Fog on, However colors don’t stay on. They turn on for a few minutes and then shut off. I also can’t change which zones are lit up and their separate colors. What am I doing wrong? I’ve got the unit set to Smoke/Atmospheric. I want to Trigger smoke with the Smoke Button on Control one where the lights turn to either Orange/Yellow, Red/Orange, Pink/Teal, Etc. and as soon as the smokes done, they link back to the color of my moving heads and Mega hex’s. Is this even possible? Thanks in advance.
---
### Author:  [@Mileon](https://community.enginedj.com/u/Mileon)
#### Post date: [March 27, 2023, 9:20am UTC](https://community.enginedj.com/t/geyser-p7-and-soundswitch-control-one/47892/2 "2023-03-27T09:20:58Z")
Hi Richard, i am not sure if SS can do that. You should write SS directly via [https://support.soundswitch.com/hc/en-us/requests/new](https://support.soundswitch.com/hc/en-us/requests/new) They are fairly quick in responding.
Or use the more active SS Facebook Usergroup. Overall SS is more active at FB [SoundSwitch User Group | Facebook](https://www.facebook.com/groups/soundswitchusergroup/?locale=de_DE)
Would be nice if you could publish their answer here in the forum to.
---
### Author:  [@Ronny\_Trippaers](https://community.enginedj.com/u/Ronny_Trippaers)
#### Post date: [August 9, 2026, 4:37am UTC](https://community.enginedj.com/t/geyser-p7-and-soundswitch-control-one/47892/4 "2026-08-09T04:37:35Z")
This is by design. You have to set the dimmer back to 0 before the leds trigger again. It works best if the cue is built up so the dimmer only goes to 255 during activation en standard stays at 0…