# Denon MCX8000 Crossfader Damanged
**URL:** https://community.enginedj.com/t/denon-mcx8000-crossfader-damanged/70617
**Category:** Mixers
**Created:** [September 2, 2026, 1:05am UTC](https://community.enginedj.com/t/denon-mcx8000-crossfader-damanged/70617 "2026-09-02T01:05:38Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Djflacoent](https://community.enginedj.com/u/Djflacoent)
#### Post date: [September 2, 2026, 1:05am UTC](https://community.enginedj.com/t/denon-mcx8000-crossfader-damanged/70617/1 "2026-09-02T01:05:38Z")
Hello everyone,
I was wondering if there’s someone who sells a plug-and-play crossfader for the Denon MCX8000. Mine seems to have broken off over the years of DJing at clubs and at a lot of other events.
---
### Author:  [@addie](https://community.enginedj.com/u/addie)
#### Post date: [September 2, 2026, 4:55am UTC](https://community.enginedj.com/t/denon-mcx8000-crossfader-damanged/70617/2 "2026-09-02T04:55:01Z")
OEM 704-MC4K-173 is the part you are looking for (or alternative 1704-MC4K-B173).
The original plug-and-play OEM module has been officially discontinued by inMusic/Denon DJ. So most authorized parts distributors no longer carry the complete pre-soldered board in stock.
Because of that, you currently have two real options:
- Mini Innofader Plus, plug and play solution without soldering ([The Innofader - Home](https://www.innofader.com/products.php?id=16))
- Bare replacement potentiometer (soldering required). Search eBay or Amazon for part number 704-MC4K-173. You will need to desolder your broken fader from the existing green circuit board and solder the new bare component in place